{"id":3418,"date":"2026-05-23T11:16:05","date_gmt":"2026-05-23T15:16:05","guid":{"rendered":"https:\/\/blog.lufamily.ca\/kang\/?p=3418"},"modified":"2026-05-23T11:16:08","modified_gmt":"2026-05-23T15:16:08","slug":"resetting-solaredge-inverters","status":"publish","type":"post","link":"https:\/\/blog.lufamily.ca\/kang\/2026\/05\/23\/resetting-solaredge-inverters\/","title":{"rendered":"Resetting SolarEdge Inverters"},"content":{"rendered":"\n

In a previous post<\/a>, one of our two SolarEdge inverters encountered an error and one quick fix is to reset the inverters. This year we had a similar issue.<\/p>\n\n\n\n

Three days ago, our solar system encountered a grid voltage issue. Our XWPro inverter was in AC PassThru mode causing the SolarEdge inverters to detect the same grid issue. Our solar system<\/a> is AC coupled. With XWPro handling grid-tied net metering, and battery charging and discharging, and SolarEdge for solar energy generation.<\/p>\n\n\n

\n
\"\"
AC Qualification Limit Exceeded<\/figcaption><\/figure>\n<\/div>\n\n\n

This grid event cause both SolarEdge inverters to go into a “Grid Profile Limit” mode where its AC output was limited to around 100W. When I reset both inverters through the main breaker panel, one recovered while the other continue with the limited output behaviour. To fix the second one, I had to perform a hard reset on the inverter. Below are the steps needed.<\/p>\n\n\n

\n
\"\"
Main Breaker Panel<\/figcaption><\/figure>\n<\/div>\n\n
\n
\"\"
SolarEdge Inverter Control Positions<\/figcaption><\/figure>\n<\/div>\n\n\n

First I had to switch off the inverter at position A, and then turn off the DC disconnect at position B. I then had to switch off the breaker on the main panel.<\/p>\n\n\n\n

The important part is to wait 5 to 10 minutes to wait for the inverter to discharge for the full reset to happen.<\/p>\n\n\n\n

Once the time has passed, perform the action in reverse. Turn back on the breaker, the DC disconnect (B), and then finally turn back on the inverter (A).<\/p>\n\n\n\n

Luckily after this hard reset procedure, the second SolarEdge inverter has been fully restored with normal operation.<\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

In a previous post, one of our two SolarEdge inverters encountered an error and one quick fix is to reset the inverters. This year we had a similar issue. Three days ago, our solar system encountered a grid voltage issue. Our XWPro inverter was in AC PassThru mode causing the SolarEdge inverters to detect the … Continue reading “Resetting SolarEdge Inverters”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[122,111,1],"tags":[206,15,28],"class_list":["post-3418","post","type-post","status-publish","format-standard","hentry","category-solar","category-tech","category-uncategorized","tag-solar","tag-solar-system","tag-technology"],"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p7V6i8-T8","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/posts\/3418","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/comments?post=3418"}],"version-history":[{"count":4,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/posts\/3418\/revisions"}],"predecessor-version":[{"id":3426,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/posts\/3418\/revisions\/3426"}],"wp:attachment":[{"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/media?parent=3418"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/categories?post=3418"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.lufamily.ca\/kang\/wp-json\/wp\/v2\/tags?post=3418"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}